Motor Trike GLADIATOR Manuel du propriétaire télécharger pdf (Page 5)

Revision 2 Page 5 of 14

Table 2: Gladiator Specifications

OVERALL LENGTH*:

104"

WHEEL BASE*:

64"

OVERALL WIDTH:

55"

TRACK WIDTH:

43.5"

BASE WEIGHT:

1200 lbs

TIRE SIZE:

225/60/R15

WHEEL SIZE:

15" X 7" Bolt Pattern: 5 X 4.5"

MAX. LOAD CAPACITY:

500 lbs

*Measured with stock rake. 4° rake kit adds 3 inches to the overall length and wheel base

AIR SUSPENSION OPERATION

An on-board air compressor allows for on-the-fly air suspension pressure adjustment. The

pressure is adjusted using the suspension control module mounted to the handle bars. To increase air

spring pressure, press and hold the “UP” button until the desired pressure is reached. To reduce the

pressure, press the “DOWN” button. DO NOT OPERATE THE VEHICLE WITH LESS THAN 15 PSI

OR MORE THAN 100 PSI IN THE AIR SPRINGS. Figure 2 shows the suspension control module.

Figure 2: Suspension Control Module

In order to ensure proper tire wear, ground clearance, and handling characteristics please follow

the guidelines listed on the sticker found on the interior of the trunk and/or top of gas tank. These

guidelines are set in order to ensure the riders safety and comfort. The sticker is shown in Figure 3

below:

VOLTAGE (V)

PRESSURE (PSI)

SUSPENSION

CONTROL MODULE

DWN

1 2 3 4 5 6 7 8 9 10 ... 13 14

Pas de commentaire

Motor Trike GLADIATOR Manuel du propriétaire Page 5